Are you wondering how to make a wig fit ? Would you like it to be perfectly secure to prevent slipping? Are you looking for a 100% natural look?
Look no further, we’ve helped thousands of people secure their wigs with this comprehensive guide. And now it’s your turn!
There are many ways to attach a wig. Tape, glue, hairpins, … Depending on the method chosen, you’ll need to take care to proceed step by step to avoid damaging your skin or hair.
In this article you’ll discover :
After reading this article, you’ll be able to determine which fixing method will be the most beneficial for you. And any wigs you use in the future will have a super-natural effect.
Let’s get started!
HOW TO FIX A WIG WITHOUT GLUE – 4 METHODS
When thinking about fixing wigs, many people often opt for the glue wig glue, which is one of the methods the most current.
When applied correctly, the glue can fix the wig in a barely visible way and can stay on for several days at a time.
However, wig glue is not a perfect solution.
Using the wrong glue may damage your scalp and provoke a reaction that can lead to hair loss.
On the other hand, too much glue can leave residues along your scalp. But a lack of glue can cause your wig to loosen during the day – and that’s of course how accidents happen.
We’ll look at how to use wig glue correctly later in this article. For now, let’s look at the other alternatives, which can often work just as well and, in some cases, even better.
1. WITH HAIRPINS
The pins need no introduction. You’ve probably used them to tame fugitive hair at some point in your life.
But did you know you can also use them to secure your wig? Hairpins provide a secure secure hold between putting on your wig in the morning and taking it off at night.
- When you decide to buy hairpins, keep in mind that not all hairpins are the same.
They come in a wide variety of shapes and sizes, differing in thickness, flexibility, ridges and color.When choosing hairpins, make sure they’re comfortable and flexible enough to wear for hours. If yours give you a headache after a few hours, replace them with a new set. If yours give you a headache after a few hours, replace them with a new set. And make sure the color matches your wig, wherever possible, to reduce their visibility.
- Once you’ve bought the right hairpins, tie or braid your natural hair. Smooth lost or damaged hair baby hair with gelthe lacquer or ointment. Your hair should be as flat as possible.
- Fix your wig slowlymoving from front to back. Make sure it’s in the position you want. Check, double-check and double-check in the mirror.
- Now it’s time to get out the hairpins. Work slowly, lifting your wig slightly, section by section. We recommend starting at the front.
Gently lift a section of the wig along your edges, then slide the clip through the weft and into your own hair.
- Walk around your head. Check that the wig is secure.
If it seems unstable, add more clips.
As long as they’re not visible (and if you’ve chosen a matching color, they shouldn’t be!), add as much as you need to feel your hair completely secured.
- Give your head a little shake to make sure the wig fits properly. You’re ready to go!
Advantages and disadvantages of hairpins
- Hairpins are cheap and easy to find. If you have access to a beauty store or even a convenience store. You can often get a pack of several dozen for just over a euro.
The low price and wide availability make it easy to try out different types, buy different colors and restock on the go.
- Hairpins use only no chemicals of any kindunlike glue, so they won’t leave you with a damaged scalp. Unless you fix them too firmly.
- Pins are easy to manage. So if you want adjust your wig or even change it completely during the dayyou’ll be able to do it without having to fight with glue.
- You will have need a good quantity of natural hair to use hair clips. Because the clips must have something to hold them in place.
If you’re wearing a wig to compensate for hair loss, hairpins may not be the method for you.
- If you use pins too tightthey can cause headaches.
- It can take a lot of pins to secure a wig properly. If you use too few, the wig may distort subtly without you noticing.
If you use too many, you risk irritating your scalp or even pulling out your natural hair.
- Using lots of pins can make putting on or taking off a wig a bit time-consuming.
- Hairpins are not not often used when it comes to putting a lace front wig or a full lace wigbecause they break the lace with holes.
2. WITH CLAMPS
Wig clips are a little safer (and a little more advanced) than pins.
On the bright side, once installed, they become a stable, long-term solution that makes putting on and taking off your wig a snap.
The downside is that you need a bit of sewing know-how to install them.
What are wig clips?
These are combs plastic or metal combs that can be sewn into your wig. They are safe and durable. Unlike hairpins, which must be added and removed at the beginning and end of each day, wig clips are permanent.
Once you’ve sewn them in, you can use the same clips for the life of the wig.
- Buy a set of clips. They’re usually sold in packs of a dozen in beauty supply stores, as they’re fairly common. Use as many as you need to feel safe.
- Sew the wig clips by hand. Space each unit about 2 centimeters apart and go all the way around.
Test to make sure the clips are secure, as you don’t want your wig to slip off! You should also check that the wire is not visible. To be on the safe side, use a wire that matches the color of your wig.You need to sew at least 6 bars : two along the hairline, one on top, two on each side around the ears, one in the back around the neck.
Then add more where you like.
- Now it’s time to prepare your own hair. Tie or braid your hair. Use gel, hairspray or pomade to flatten flyaways and straighten stray strands.
- Slowly slide the wig over your head, starting at the front.
Insert carefully the pliers into your natural hair, one at a time. Take your time. Don’t over-tighten the clips. This could cause headaches, and you mustn’t move too fast and accidentally break off part of the clip. Depending on the material they’re made of, the teeth of wig pliers can break easily.
- Check that your wig is straight, and check that it’s secure by shaking your head slightly or wearing it at home for about five minutes.
If you feel that something is slipping, secure the wig clips more firmly, add a few bobby pins or consider sewing on more barrettes.
Advantages and disadvantages of clips
- Because they slide directly into your natural hair, wig clips offer a secure hold without the risks associated with the use of thick glue.
- Wig clips are quite versatile. easy to install and long-lasting. This makes them a good long-term option for people who don’t have time to struggle with dozens of hair clips every morning.
- Wig clips are invisible. If you install them correctly and use a wire that matches your hair, you’ll never have to worry about anything appearing by accident.
- As with hair clips, you need a good quantity of natural hairpreferably at least one or two centimetres, so that wig clips can take hold. For people who are losing their hair, this may not be a viable long-term option.
- Similarly, for people with sensitive scalps or whose hair is prone to breakage, wig clips can cause headaches or exercise a excessive pressure on natural hair.
- The installation of wig clips requires special sewing skills. Only basic knowledge, of course, but knowledge nonetheless.Anyone who is not an experienced sewer can leave visible lines or accidentally damage the wig.
If you don’t already know your way around a thimble, learn from a friend, watch some YouTube videos and practice on a piece of fabric before using a needle on your wig.
- Wig clips are not not yet as safe as the glue.
So if you’re doing a lot of physical exercise, you’ll need to take extra care that your wig stays in place during exertion.
Consider adding a few bobby pins for good measure. Prevention is better than cure.
3. WITH ELASTIC BAND
This one will require a little more sewingbut once you’ve sewn it, it will still require less work than the hairpin or wig-clip method.
A rubber band is a band that can be attached to a wig from ear to ear to secure it quickly and easily. This method is particularly useful for people in a hurry.
- Fortunately, this method does not require any particular type of hair-compatible elastic. Any type of elastic will do as long as you find it comfortable and doesn’t pull too hard on your scalp.
Use your nearest craft store to get a roller at a relatively low price.
- Sew the elastic inside your wig, pulling it over your head from ear to ear.
Make sure that no part of the elastic band shows through. You don’t need to go so far as to dye the elastic the same color as your wig.
However, if you can find an elastic that matches the color of your wig, it will make the process all the easier as it will help the wig look natural.
- Apply the wig onto your head slowly, working from front to back. If it’s too loose, tighten the elastic. Check in the mirror to make sure everything is in order.
Advantages and disadvantages of elastic bands
- Elastic is a material easy to handle. Unlike wig clips, which have to be carefully sewn, elastic is a little simpler for beginners. Because it’s thicker and can be sewn in one continuous piece.
- This method is perfect for people in travelbecause you can put on your wig on the way out. There’s no need to fiddle with dozens of hairpins, and you don’t even have to worry about wrestling with wig clips. Just slip it on, adjust it in the mirror and go.
- Unlike hairpins and wig clips, a rubber band has no doesn’t require a lot of natural hair to stay in place. So it’s perfect for anyone suffering from hair loss or sensitive hair.
- Like wig clips, this method requires a little sewing. Sewing errors can cause your wig to sit incorrectly or prevent the elastic from securing it properly.
- The elastic can pull against your scalp. When applied incorrectly, elastic can rub against your natural hair and cause breakage.
- If you don’t secure the elastic firmly enough, this method won’t be as secure as hairpins or a wig.
So if you plan to do a lot of strenuous exercise or even leave your wig on for an extended period of time, you may need to manage slippage.
4. WITH A WIGBAND
One of the most common methods is the wigbandsand for good reason. He is easy à fix and to go toand you don’t need natural hair for a sublime result.
They are more advanced than ordinary elastics, as wigbands are often composed of two elements.
The velvet on both sides gives you a firm hold that won’t irritate your scalp or pull your hair, while the gripping material adheres to your scalp on one side and the wig on the other.
- Smooth your natural hair if you have any, and secure it with glue or hairspray, paying particular attention, as always, to baby hair and flyaways.
- Line up the handle of the wig with your hairline, and adjust using the strap at the back. Slowly attach the wig from front to back. The nape of the wig should be the last piece attached.
- Make sure your wig is straight and secure by looking at it in the mirror, gently shaking your head or wearing it for a few minutes. If it slips, tighten it more.
Advantages and disadvantages of wigbands
- The handles make your wig easy à go to and to remove.
So easy, in fact, that you can easily remove your wig during the day. Whether you just want to freshen up in the summer months or even change your hairstyle during your lunch break.
- It’s sweet for scalps and sensitive skinsand won’t pull at your natural hair. If you’re losing your hair or just trying to grow it out, this is an excellent choice of protection.
- The absence of tight clips reduces the risk of headaches or discomfort.
Unlike wig clips, wigbands don’t last forever, as they can stretch over time and therefore offer an increasingly insecure hold. How often you need to change your wig-clip depends on how hard you pull it and how often you wear it, so be careful.
If you’d like to use one of the 4 methods above, read our article explaining how. how to put on a wig without glue. This step-by-step article is illustrated with pictures.
HOW TO FIX A WIG WITH GLUE
The first method, and perhaps the most secureis wig glue.
You can apply glue just around the edges if you’re wearing a lace front over natural hair.
But if you’re completely bald, you can use roll-on glue to secure the wig with a firm hold and a natural look.
Whichever method you choose, be aware that incorrect removal of the glue can result in hair pulling out. So if you have a sensitive scalp, beware.
Here are the steps to apply wig glue:
- First, you need to clean your hairline. Moisten a soft cloth or cotton bud and run it gently along your hairline to remove any build-up of dirt and oil that might prevent the glue from adhering properly.
- Apply gently the glue along your hairline.
Follow the instructions on the packaging, as each glue is a little different and some need to dry slightly before you can stick the wig to your scalp.
- Fix your wig slowly and carefully, working from front to back, as with other gluing methods.
- Make sure your wig is straight before pressing it in firmly, otherwise the glue will stick while the wig is still askew! The last thing you want is for your wig to be firmly attached, but crooked.
- Press gently the hair onto the glue. Leave to rest for 10-15 minutes before styling to ensure that the glue is completely dry.
- Wig glue is relatively inexpensive.
- No sewing necessary. Even if you don’t know how to use a needle and thread, you can easily glue and press.
- Compared with hairpins, wig glue is incredibly safe and takes less time.
- As with all chemical productthere is a risk of reaction allergic. Test the glue by dabbing a small amount onto the back of your hand and leaving it on for several minutes (or preferably overnight).If you develop a reaction, don’t use this glue on your scalp! Unless you want to seriously damage your hair. Even if you’ve never had an allergic reaction to a hair chemical, prevention is better than cure. So be sure to test everything before you apply it.
- Unlike hair clips and pins, wig glue can’t be reused, so you’ll need to make sure you don’t use any more. buy continuously others.
- Removing your wig and reapplying it several times during the day is not recommended, as it may pull your hair or irritate your scalp.
If you tend to overheat with a wig, you may therefore choose a method that will give you more flexibility to remove it during the day.
- If you don’t completely remove the glue at the end of each day, either with water or a mild solution, the glue will can build up and irritate your skin.
That said, let’s take a look at the two most popular kinds of glue.
1. SOFT GLUE
Got2B is one of the most popular brands among wig enthusiasts.
For use in short-termThe choice of a soft, simple glue is recommended. Various brands offer glues for beginners that are easy to apply and use.
However, this type of glue is not very resistant to sweat or water. So if you’re going out in the rain or planning to go to the gym, choose a more resistant brand.
2. HOLDING GLUE
A wide range of holding glues are also available. Perfect for everyday use, they can withstand not only precipitation and perspiration, but also overnight wear. With this kind of glue, you can wear your wig for days on end. Perfect for a busy schedule!
HOW TO FIX A WIG WITH TAPE
If you have natural hair, tape isn’t the best choice, as it can easily pull out your roots and leave your skin irritated (and your hair damaged).
Wig tape is as simple as it sounds. It’s a double-sided adhesive which secures your wig to your scalp along your hairline.
Although at first glance tape doesn’t seem particularly secure (especially compared to something like glue), it’s actually an extremely stable measure that can hold your wig on for an entire day.
- Cut the tape into strips according to your preference. You’ve got a lot of freedom here, so press the tape along your hair in whatever way feels safest. If you’re bald, you can stick the tape all over your head for an extra-strong hold.
- Be aware that some wigs come ready-made with places to place the tape. This will make the process much easier.
- Glue on the wig slowly, starting with the front and back.
- Check the wig in the mirror.
- Press firmly on the wig and hold for several seconds to make sure the glue adheres. Now you’re ready to go!
- Adhesive tape is often also strong than wig glue, and requires less cleaning thereafter.
- Wig ribbon is not the cheapest on the market, but a single roll lasts a long timeso it’s well worth it.
- The risk of chemical reaction is lower than with glue.
- As with the glue, it’s difficult to remove the wig throughout the day.
- Although you don’t use pure chemicals like glue, wig tape can leave from residues. So be sure to clean your hair, scalp and any other parts that come into contact with the ribbon throughout the day.
- If your ribbon is particularly sticky, you may need a solution to help it come off.
WIG RIBBON VS. GLUE
Wig tape or wig glue. Which is better?
Which is easier to use?
The adhesive tape. It requires no mess and is easy to apply.
If you make a mess during the set-up procedure, it’s easy to remove the tape and readjust your wig. Easier than washing off the glue and starting again.
What’s best for a natural look?
The glue. While adhesive tape can look extremely natural, beginners risk leaving some of the tape visible.
On the other hand, the glue dries transparently, guaranteeing a more natural look.
What gives a better hold?
Both can be just as strong.
Not least because glue and tape have very different properties. Ranging from a lighter hold that’s suitable for sensitive scalps, to a tighter hold that’s perfect for gym-goers.
What’s easy to take off during the day?
None. If you want to remove your wig during the day, either to freshen up or to quickly change it for another look, you’ll be much better served by wig clips or bobby pins.
Tape and glue will both require a great deal of effortand removing and replacing them too often can irritate your edges.
Where can I find them?
Almost all beauty products stores have wig tape or glue in stock, which is handy.
Unlike wig clips, these items can’t be reused, so keep supplies in your cupboard to avoid being betrayed by an empty bottle or exhausted roll.
If you’re interested in either of these two fastening methods, don’t hesitate to read our article explaining how they work. how to glue a wig.
CHOOSING THE MOST APPROPRIATE WAY FOR YOUR NATURAL HAIR
1. WHEN YOU’RE BALD
If you’re bald, you have a wide range of options for maintaining your look. hairpiece firmly in place.
Although hairpins and wig clips require a certain amount of hair, being bald gives you a advantage when you apply adhesive tape or glue.
You can apply wig glue all over your scalp for an enviable hold and firm. This is not the case for people with hair.
When using glue, it’s essential to prepare your head properly. It’s not as simple as rubbing glue on your scalp and pressing on the wig.
Follow these steps to protect your skin!
First, wash your scalp thoroughly with soap and warm water to remove dirt and oil.
Natural oils can prevent glue from sticking completely, and they can also, if allowed to build up under your wig, cause buildup that will harm the health of your scalp.
After cleaning, spray on a scalp protectant to create an extra barrier between your skin and the wig. This can prevent dirt build-up. Once the protector has dried, apply liquid adhesive with a small applicator brush and dry for 30 seconds.
Apply the wig from front to back. Adjust it in the mirror before pressing it firmly into place.
2. WHEN YOU HAVE SHORT HAIR
If you have short hair, you have the most options for fixing your wig.
You can either braid your hair down, or if it’s short enough, simply apply the wig directly after brushing stray strands from your face.
Having a little hair will also allow you toeasily use hairpins or wig clips. Short hair can also be easily placed under a wig cap.
Hairpins, wig clips, an elastic band or a wig clamp work best. However, you can also use tape or glue around the edges for a secure hold.
3. WHEN YOU HAVE LONG, THICK HAIR
Wearing a wig if you have long, thick hair can be a little more challenging, but it’s totally doable. You too can achieve a chic look!
The most important factor is to keep your natural hair flat under the cap.
If your hair prevents your wig from lying flat against your scalp, you can’t achieve a natural look. Nothing betrays the fact that you’re wearing a wig faster than a wig that isn’t properly secured.
To keep your hair flat, comb it carefully and then braid it. Preferably in several braids evenly distributed around your head. If this isn’t possible, you can also wrap two French braids evenly around your head.
If you braid your hair while it’s damp, let it dry before attaching a wig cap.
Finally, apply bobby pins or wig clips.
Since you have a lot of natural hair, these methods will help you secure your wig. Add as many pins or clips as you need, depending on the thickness of your hair. The more hair you have, the more pins you’ll need to hold it firmly in place.
Even if you’re using wig clips, take along a few bobby pins to ensure an extra-strong hold. You can use wig glue around the edges to finalize the hold.
If you’d like to go into more detail on the subject, please read our article which explains How to wear a wig with long hair.
4. WHEN YOU WEAR WIGS TO PROTECT YOURSELF
If you’re wearing a wig to protect your natural hair, the most important is the wig cap. A wig cap is an absolute must for anyone trying to prevent visit breaks.
A rubber band or wig clamp will work better than bobby pins or hair clips, which can pull on your natural hair. Glue and tape can also accidentally pull on your roots if applied incorrectly, so to avoid these possibilities altogether, use a elastic band.
If you choose to use bobby pins, braid your hair first to prevent tangling and encourage growth.
Apart from this, you can and should take a series of steps to protect your natural hairfor all hair lengths:
- Massage your scalp regularly, especially if your wigs are often a little tight. This stimulates blood circulation and promotes growth.
- Shampoo often. Your hair can become particularly sweaty under a wig. So you’ll need to clean it regularly. A deep conditioner is always a great bonus.
- Make sure your hair is dry before applying a bonnet, otherwise you risk developing mildew.
During the day, also be aware of the amount of sweat and moisture that forms under the wig, which, if left unchecked, can lead to equally unpleasant build-up.
- Remove your wig at night. This will aerate your scalp and allow it to dry out from all the moisture it has absorbed during the day. What’s more, if you wear a wig to bed, you also run the risk of it rubbing too hard against your scalp or edges while you sleep. This will damage your skin and lead to hair loss.
- Moisturize, moisturize, moisturize! Dry hair often breaks. So saturate your hair with a water-based moisturizer every night before bed.
- Let a professional trim your ends when they’re dry or damaged to promote thick, healthy hair growth.
It may seem counterintuitive to cut your hair to grow it out. But eliminating damage does wonders for their health.
THREE KEY POINTS TO PUTTING ON A WIG CORRECTLY WITH COMFORT AND HAVING A NATURAL-LOOKING HAIRLINE.
First, let’s take a look at the most popular part of wearing a wig: the wig cap. This is also known as a stocking cap.
1. SECURING THE WIG CAP – HOW TO PREVENT IT FROM SLIPPING OFF
Securing a wig cap is very similar to securing a wig. Pins will be your best friend throughout the process.
When you put it on, make sure it’s not too loose. That is, it should cling fairly firmly to your scalp without too much effort. If it doesn’t hold properly, either you’ve bought the wrong size, or you’ve worn it out to the point of stretching.
Braid-you hair as flat as possible. This will enable your wig to maintain a better hold on your scalp. Use hair gel or a small amount of water to make this process as easy as possible.
Note: when properly moisturized, your hair should be damp or wet, but not soggy.
If you have trouble laying the braids flat, you can secure them with barrettes.
Choose a beanie with wig matches to your dyed to create the most natural look possible. In theory, your cap should never be seen. But if your wig comes slightly askew during the day, a more natural color will help hide this problem.
Before applying the wig, use a scalp protector to protect sensitive skin from irritation that might result from rubbing against the wig or cap during the day. Allow the protector to dry before applying the cap.
When you put on the cap, make sure to align it with your natural hairline, then apply it from front to back. The same way you would apply a wig. It should be exactly at your hairline.
Here’s a video covering some of the points we’ve just seen.
2. GLUE HAIRLINE
Use a small amount of wig glue along your hairline to create a flat hold.
You can apply this amount in the same way you would apply glue to a wig, making sure to clean the roots of your hair first to remove any dirt.
Test the glue first to make sure you don’t have any adverse reactions. Slowly press on the wig cap, starting at the top of your hair and working back towards your ears, to get a good hold. Let the glue dry.
3. HOW TO ATTACH THE WIG TO THE BACK
Pull the wig cap completely over your head until it reaches the back of your head. nape of the neck. For a better grip, it should hook onto your head at the exact point where the top of your neck meets the base of your head.
Use hairpins to secure the bonnet. You can never have too many! (Just be careful not to over-tighten your natural hair).
Hair clips are your friend, especially in the back where it can be difficult to get a good hold with glue. You should use at least two pins to ensure a secure hold. The thicker your hair, the more pins you’ll need.
When you want to wear your wig in a high ponytail, choose a 360 lace wig or a full lace wig. It’s best to glue the back with the help of another person.
THE MOST POPULAR METHOD FOR SECURING A WIG – THE WIG CAP
The bonnet method (also known as the bald scalp method) is currently the most popular method for attaching a lace wig, and results in a very natural-looking hairline.
The first step in this method is to attach the cap of the wig. It’s best to bond it to the scalp using glue and a foundation of the same color as the skin.
HOW TO PUT ON A WIG WITHOUT A CAP?
Faux scalp lace wigs will be your best choice if you’re more willing to wear a wig without a cap. The prefabricated faux scalp is designed to take the place of the wig cap, hiding the natural hair in the front parting area.
If you don’t want to wear a cap, read our article explaining how to do so. how to wear a wig without a cap.
IT’S TIME TO UNVEIL YOUR NEW LOOK!
As you can see, there are a multitude of ways to wear your wig. However, depending on the condition of your natural hair and your lifestyle, certain choices will be wiser
And that’s it! You now know the best ways to fix a wig. You know the advantages and disadvantages of each method. You’ll be able to choose and use different fixings to your advantage.
To help you inaugurate your new style, we offer our 100% natural wigs made from human hair.